Professional Gas Pipe Work Across Melbourne
Gas pipe work is the infrastructure that connects your gas meter to every gas appliance in your home. When it is installed correctly and maintained properly, you never think about it. When it develops a fault, it can be dangerous.
Gas Experts Melbourne carries out all types of residential gas pipe work across Melbourne. Whether you need a new gas connection run to a kitchen cooktop, an extension to a renovation or new build, a repair to a damaged or leaking gas pipe, or a full gas pressure test on a property you have just purchased, we handle it all.

Every gas pipe installation or repair is carried out to Australian Standards (AS/NZS 5601), pressure tested on completion and signed off with a certificate of compliance. No guesswork. No cutting corners. Just properly installed, fully compliant gas pipe work.

Gas Pipe Work Services We Provide
If your home currently has no gas connection, or if you want to add gas to a room, kitchen or outdoor area that does not currently have a gas supply, we can run new gas pipe work from your existing gas meter or service pipe to the required location.
Common new connection requests
- New gas cooktop connection in a kitchen that currently has only electric appliances
- Gas connection to a new extension or additional room
- Gas connection to a granny flat or secondary dwelling
- Gas connection to an outdoor entertaining area for a BBQ gas point or outdoor heater
- Gas connection to a new laundry for a gas dryer
What's involved
- Assessment of the existing gas meter capacity and pressure
- Planning the pipe route from the supply to the new location
- Installation of new gas pipe work in compliant materials (typically copper or CSST)
- Connection to the gas supply and the new appliance outlet or point
- Full system pressure test
- Certificate of compliance
Extending an existing gas line to reach a new location, a kitchen renovation, an added room, an extension or a new outdoor area. The existing gas supply is extended using new pipe work run through walls, under floors or in roof spaces as required.
Gas pipes can be damaged by building work, renovation, pest activity, ground movement or corrosion. A damaged gas pipe must be repaired promptly and correctly by a licensed gas fitter.
Signs of a damaged gas pipe
- Gas smell near a wall, floor or ceiling cavity
- Unexplained increase in gas consumption
- Dead vegetation above underground gas pipe routes
- Physical damage to gas pipe visible after building or renovation work
- Pressure loss identified during a gas pressure test
Our repair process
- Locate the fault using pressure testing and electronic gas detection
- Assess the extent of the damage
- Repair or replace the affected pipe section
- Post-repair pressure test to confirm the repair
- Written record and certificate of compliance
A gas pressure test is the standard method for confirming that a gas system has no leaks. It involves isolating the gas meter, pressurising the gas system to a test pressure and monitoring for any pressure drop over a set period.
When a gas pressure test is recommended
- When purchasing a new property confirm the gas system is leak-free before you move in
- After any building or renovation work near gas pipes
- When an unexplained increase in gas consumption suggests a possible slow leak
- As part of a comprehensive gas safety inspection
- Before reconnecting gas to a property that has been vacant
We carry out gas pressure tests across Melbourne as a standalone service or as part of a broader gas safety inspection.
Gas meter upgrades, meter relocation and gas regulator replacement. We work with gas distribution companies to coordinate meter work where required and carry out all associated gas pipe work on the property side of the meter.
Older Melbourne homes may have gas pipe work in materials that have been superseded or that have deteriorated with age. We carry out gas pipe upgrades to replace aged or non-compliant pipe work with modern, compliant materials.
Running gas pipe underground to outbuildings, granny flats, pools, outdoor kitchens or other structures on the property. Underground gas pipe work uses approved materials and installation methods compliant with AS/NZS 5601 requirements for buried gas pipe.
Why Only a VBA Licensed Gas Fitter Should Touch Your Gas Pipes
Gas pipe work is the most safety-critical aspect of a residential gas system. Incorrectly installed or repaired gas pipe work is the source of some of the most serious gas incidents in Australian homes.
In Victoria, all gas pipe work, installation, modification, extension and repair, must be carried out by a VBA licensed gas fitter. This requirement exists because:
Every gas pipe installation we carry out is performed using compliant materials, completed to Australian Standards, pressure tested to confirm zero leaks and certified with a certificate of compliance.
- Incorrect pipe sizing causes appliances to operate at the wrong gas pressure, leading to combustion problems and safety risks
- Incorrectly sealed joints create gas leaks that may not be immediately detectable
- Non-compliant materials degrade faster and are more prone to failure
- Incorrect underground installation can result in pipe damage from ground movement or soil corrosion

Gas Pipe Work for Kitchen Renovations, Extensions and New Builds
Renovations and new builds are the most common reason Melbourne homeowners need new gas pipe work. Here is how we work with homeowners and builders to coordinate gas pipe installations within a project.
A kitchen renovation is the ideal time to add gas cooking if your kitchen currently has only electric appliances. During the renovation, walls and floors are accessible, making the gas pipe run straightforward and cost-effective.
We work alongside kitchen designers, cabinet makers and builders to run gas pipe work before new cabinets and benchtops are installed. Early coordination ensures the gas point is in exactly the right location for the cooktop before the kitchen is sealed up.
If you are adding a room, granny flat or extension and want gas available in the new space, for a heater, a cooking appliance or a gas connection point, we plan and install the gas pipe work as part of the construction phase.
For new builds, we install all rough-in gas pipe work during the construction phase, prior to walls being closed. We then return to connect appliances once the fit-out is complete. We work with builders and project managers to coordinate timing within the build schedule.
Running gas to an outdoor kitchen, alfresco area or entertaining space. We install underground gas pipe work or surface-mounted pipe work to the outdoor location, install gas outlets and connect all appliances.
Need Gas Pipe Work in Melbourne?
Gas Experts Melbourne provides professional gas pipe installation and repairs across Melbourne. VBA licensed. Fixed upfront pricing. Full pressure test and certificate of compliance on every job. No call-out fee when you book online.
What's Included in Every Gas Pipe Installation or Repair
- Full assessment and fixed-price quote before work begins
- All pipe work carried out in compliant materials to AS/NZS 5601
- Full gas pressure test on completion: confirming zero pressure loss
- Leak test at all new joints and connections
- Complimentary gas safety inspection
- Written record of work completed
- Certificate of compliance for the gas work
- Workmanship guarantee in writing

Gas Pipe Installation Costs in Melbourne
We provide fixed-price quotes: no hourly rates, no call-out fee when you book online.
| Service Type | Approximate Cost |
|---|---|
| Gas pressure test: standalone | From $120 to $180 |
| New gas connection: kitchen (short run) | From $350 to $600 |
| New gas connection: kitchen (longer run) | From $500 to $900 |
| Gas line extension to outdoor area | From $400 to $800 |
| Gas line extension to extension or new room | From $450 to $900 |
| Gas pipe repair: minor (joint or fitting) | From $200 to $400 |
| Gas pipe repair: section replacement | From $350 to $700 |
| Underground gas pipe run | From $600 to $1,500+ depending on distance |
Note: These are indicative price ranges only. A fixed price is confirmed after assessing the property and the specific scope of work required.
Special Offers
- New Connection Discount Discounted gas pipe installation when combined with any appliance install.
- Pensioner Discount 10% off all gas pipe work for pension and concession card holders.
Why Melbourne Homeowners Choose Gas Experts Melbourne for Gas Pipe Work




